EMS House of DeFrance
http://www.emshouse.com 

Keepin' Up in EMS
8 12 08 UPDATE: Ferno PROFlexx stretcher failures
By
Aug 12, 2008, 12:49

Courtesy the EMS House of DeFrance http://www.defrance.org

Update 8/12/08

Well, we've waited for Ferno to give us the full "corrected" info since 8/8 as they said they would but we haven't received anything, so the orginal info will only change as to what  Massachusetts (in pdf) was sent from Ferno -namely it is the Ferno PROFlexx Model 35-X stretcher, not the Ferno PROFlexx Model 35-P stretcher withte problem.

UPDATED 8/8 1:31 p.m. AST
Ferno has contacted us to say the info we posted from Paul Coffey, DPH Massachusetts is not correct and they are issuing the correct information.  It was not clear to me if the problem exists but with a different stretcher, or if it is a different problem. We will update this article as that corrected information is provided to us. Updated info provided by Dorothy at Ferno  937-382-1451  ext 1285
Correction will come from a Mr. McDunn.

-----------

Original Article

The Department has received information documenting several instances in which Ferno PROFlexx model 35-P stretchers (ambulance cots) have suffered metal fatigue and breakage of the telescoping legs.  The area of highest concern is the X frame axle (where both telescoping legs connect).

All ambulance services using this model stretcher should immediately inspect all of them for signs of metal fatigue (shavings, bent support arms, cracks, etc,).  If such signs are discovered, remove the cot from service immediately and arrange for inspection and maintenance by a factory authorized representative as soon as possible.  Even if you do not discover any signs of metal fatigue, you should contact Ferno-Washington, or the dealer who provided your stretcher, for immediate inspection and/or maintenance.

Furthermore, EMTs should be reminded to keep both hands firmly on the cot AT ALL TIMES, since at least one cot leg break occurred as the EMTs wheeled a patient toward the ambulance.  In addition, wheeling the patient at the lowest cot height is the safest method to minimize any potential harm to the patient, since catastrophic failure can occur without warning.  Finally, all patients must be firmly secured to the cot using the over the shoulder harness, hip and leg straps.

Ambulance services should file a “Medical Devices Report” report with the FDA at

https://www.accessdata.fda.gov/scripts/medwatch/medwatch-online.htm.

Submitted by Paul Coffey, DPH Massachusetts

 



The contents, unless otherwise specified, are copyrighted by © EMS House of DeFrance.
http://www.defrance.org and/or http://www.emshouse.com